 |
Base Plates |
Model 1210 Table Mount Base PlateFor permanent table mounting, this aluminum base plate with lock screw is provided with Model 1430 and 1530 stereotaxic frame assemblies. The base plate should be bolted to a table surface. A 20 mm (25/32 or .781") hole drilled through the table to allow vertical adjustment of the shaft on the stereotaxic frame is required to lower height of apparatus. Weight: 12 oz. |
 |
Model 1211 Base PlateThis portable mounting plate is constructed of 3/8" aluminum plate. It has a clamp screw and mounting socket with a 3/4" diameter hole for the stereotaxic instrument. A 20 mm (25/32 or .781") hole drilled through the table to allow vertical adjustment of the shaft on the stereotaxic frame is required to lower height of apparatus. Weight: 7 lbs. |
|
Model 1711 Intracellular Base PlateThe Intracellular Base Plate is supplied with the Model 1730 Intracellular Frame but can be used to support any stereotaxic frame. This heavy aluminum base plate has four rubber feet to help dampen vibration. There is a 1" hole for mounting the stereotaxic instrument at one end of the plate and two 3/8-24 threaded holes at the other end of the plate for mounting the Model 1735 Vertical Post & Tie Bar for additional stability. You can mount Model 1430 or 1530 stereotaxic instrument to this base by ordering Model 1712-02 Sleeve to reduce the mounting hole to 3/4" diameter. This set-up will require a 20 mm (25/32 or .781") hole drilled through the table to allow vertical adjustment of shaft on stereotaxic for lowering height of apparatus. |
Another option is Model 1725 Universal Clamp and Stand Post. Model 1725 allows easy adjustment of stereotaxic frame height, which can be positioned anywhere along the vertical shaft. Weight: 40 lbs. |
Model 900-E Lazy Susan Base PlateThis unique style base plate allows the standard Model 900 series small animal stereotaxic instrument to be mounted to a custom plate that can be rotated 360°. There is a locking screw that allows the plate to be secured in place. Weight: 13 lbs. |
|
Model 912 Spinal Base PlateThis precision machined aluminum base plate has two full length tee slots for the rapid mounting and removal of components. It will accept the 900 series small animal stereotaxic instruments. Plate can be drilled to accept 1430 and 1530 stereotaxic frames. Weight: 27 lbs. |
Model 1712 Instrument Mounting PlateDesigned for micro electrode work where high inertia and maximum rigidity are essential. Model 1712 base plate is aluminum with 1" diameter hole and tee handle lock for mounting Model 1730 Intracellular Frame. You can mount Model 1430 or 1530 Stereotaxic Frame to this base by ordering the Model 1712-02 sleeve to reduce the mounting hole to 3/4" diameter. This set-up will require a 20 mm (25/32 or .781") hole drilled through the table to allow vertical adjust-ment of the shaft on the stereotaxic for lowering height of apparatus. Another alternative would be our Model 1725 Universal Clamp and Stand Post. Model 1725 allows easy adjustment of stereotaxic frame height, which can be positioned anywhere along the vertical shaft. |
Rubber feet are provided on the corners to help dampen vibration. Weight: 77 lbs. |
|